Project Z750 part 14

I thought that some photos would be in order rather just all that plain old boring text, so here is a front caliper and it's pistons:

This is the caliper before I managed to get the slide off.

the pistons show a before polishing started and part way through.

Here are the pins that hold the pads into the calipers. again you can see the before and part polished (I hope you can tell which is which)

I thought I would show a picture of the rear caliper in pieces: there are more bits for a single caliper than I realised. The rear is a single piston caliper.

and one of the front calipers. the front calipers are twin pistons (as I hope you noticed)

I dont think that I will be able to remove all of the corrosion from the caliper pistons, so it looks like I will be getting all new caliper pistons. I'll order them once everything has been cleaned thoroughly.

Comments

Windows Subsystem for Linux Internals

Background Windows Subsystem for Linux was developed by Microsoft to enable command line programs compiled for the Linux operating system to be executed on Windows. To explain the architecture I would like to show the evolution of OS design and how that has enabled this subsystem to be built. Dark Ages (or Back in the Day) Microsoft's MS-DOS was quite primitive in its design (compared to today's OS's). It is a single user OS that can execute one process at a time. DOS had an application programming interface to allow user programs to access some hardware in a device independent way, but only for character-based applications. This allowed applications to display graphical elements emulated with text characters as these screenshots of Microsoft word for DOS show: This is Microsoft Word version 1. To use these programs you had to remember key combinations to bring up the menus and used the cursor keys to navigate around the screen. If the a...

I'm a Triathlete (again)

So, I've finally done it. I'm a Triathlete again. First a bit of background. In the 90's I used to work at Xerox in Hertfordshire. I used to run with the work club some lunchtimes, swim with friends on the other lunchtimes and cycle to work some days. Xerox had a small gym on site with a resident fitness instructor. Approximately every six months I would have a fitness test to see if I was getting fitter. it was a stationary bike test and they measured fat percent and blood pressure (probably a bit more, but it was a long time ago now). During one of these fitness tests the instructor asked what exercise I did, and told him, and he suggested that I have a go at triathlons. So I looked for magazines (This was actually before Google. Yes there was a time before Google existed). I found a magazine called "220 Triathlon" and read through it to learn more about triathlon and look for races. I'm not sure how I found out about it, but I was told about the ...

Creating a Watch Face for Android Wear OS 2

Step 1 - Setup my watch for development I have wanted to create a watch face for android wear for a while, but as no new watches were being released my old Moto 360 watch running wear os 1.0 got out of date and I stopped using it. For Christmas 2018 I got a new wear os watch running wear os 2.2 (android os 8.0.0). it has a round 400 x 400 screen and I decided to finally get round to creating myself a custom watch face for it. The first thing I do with all my android devices is to enable developer options. if you don't know how to do that then you can find the method using a google search. I won't give it hear as it opens up all sorts of options that could make android become slow/unusable. Once I had developer options enabled, I turned on USB debugging. This watch (as opposed to my old Moto 360) has a USB connection to the computer, so I don't have to use WiFi debugging (which has to be set up for each debugging session). now on to the watch face creation. St...

My Ramblings

Search This Blog